Checking The Settings - Omron H5S Series Manual

Program Check Function
Weekly, 2 Circuits
The days and times when output is set to turn ON and OFF over the
course of one week can be displayed in the sequence in which the
Time Switch is to operate.
1. Press TEST
mode.
("test" flashes and the day and time
of the next change in output state are
displayed.)
2. Press WRITE
The display shows the time of the
next change in output state.
Each time
display shows the days and times for
one week.

Checking the Settings

Weekly, 2 Circuits
The program can be checked for one week from the current day.
Change to the setting mode to check the year program past one
week.
1. Press one of the Day Keys for 2 s or
more in RUN mode to check settings
for the day.
("chec" flashes and the time of the
first ON time is displayed.)
2. Press
WRITE
The display shows the time of the
next change in output state.
Downloaded from Elcodis.com electronic components distributor
Yearly, 2 Circuits Yearly, 4 Circuits
Shaded portion indicates
blinking of the indicator.
for 2 s or more in RUN
SUN MON TUE WED THU FRI SAT
.
WRITE is pressed, the
Yearly, 2 Circuits Yearly, 4 Circuits
Shaded portion indicates
blinking of the indicator.
SUN MON TUE WED THU FRI SAT
.
Day Override Operation
Weekly, 2 Circuits
Operation for one day can be temporarily (for only one week)
executed on another day.
Example: The operation set for Sunday is executed this Saturday.
The Time Switch performs the ordinary operation
(according to the previous settings) from next Saturday
onward.
1. Press COPY for 2 s or more in RUN
mode.
(The Time Switch enters day override
operation setting mode.)
2. Turn ON the bar ( ) at the position
of the day for which the set operation
is to be executed on another day.
("copy" will flash.)
3. Press WRITE to select the day on
which the operation is to be
executed.
4. Turn ON the bar ( ) at the position
of the day. More than one day can be
selected.
5. Press WRITE to enter the setting.
Note:
• Any day in the 7-day period starting from the current day can be
set as a day on which another day's operation is to be executed.
The setting is automatically cleared after the day has passed.
• All ON operations are executed on another day.
• The day override operation settings are valid for all the output
circuits.
Manual Summer Time (DST)
Adjustment
Weekly, 2 Circuits Yearly, 2 Circuits
Each time +1h is pressed for 2 s or more in RUN mode, the current
time switches between the current time and the current time +1 hour.
SUN MON TUE WED THU FRI SAT
Note: With Yearly models, the current time can also be automatically
switched to DST. For details, refer to functions F6 and F7 on
page 25.
H5S
Shaded portion indicates
blinking of the indicator.
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
SUN MON TUE WED THU FRI SAT
Yearly, 4 Circuits
SUN MON TUE WED THU FRI SAT
21