Nortel Internet BWA System 3200 User Manual page 54

6-14 Installation and commissioning procedures
Procedure 6-3 (continued)
Connecting the interface cables
•
Tools
•
•
•
•
•
•
•
•
•
•
•
•
•
Equipment
•
•
•
Internet BWA System 3200
Additional guidelines before the connection of the interface cable:
— When cutting the cable length, be sure to add extra length for the
service loop.
— Ensure that a strain relief is added to each cable connection.
— Ensure that the external connector is sealed and waterproof.
— Follow standard installation practices.
– Avoid sharp corners.
– Attach the interface cable to the tower members or cable runways
with the use of hanger kits or tie-wraps at one meter intervals.
— When routing the interface cable, avoid blocking the wireless antenna
pattern.
11mm / 7/16" open wrench
13mm / 1/2" open wrench
phillips screwdriver (medium)
Cable cutter
Knife, skinning
Pliers, long nose
Cable ties (P0567238)
Screwdriver, slotted 1/8 inch
Anti-static kit
Wire cutter
Crimper (for coaxial cable)
Wire wrap tool (for twisted pair cable)
Soldering iron with solder
one (1) 433.92 MHz antenna with reverse SMA connector
one (1) optional RG-58U test cable with a reverse SMA female connector
fitted at one end and a BNC male connector at the other end.
one (1) twisted pair interface cable
NTXXXXXX Rel 3.0 Draft October 2000
—continued—