Nortel Internet BWA System 3200 User Manual page 46

6-6 Installation and commissioning procedures
Procedure 6-2 (continued)
Installing the Internet BWA System 3200 on a pole
Equipment
Required equipment (refer to
•
•
•
•
•
•
•
Figure 6-1
Mounting equipment for the Internet BWA System 3200
Pole clamp
(2 places)
Internet BWA System 3200
One azimuth adjustment plate (part 101488-1) that attaches with:
— One U-bolt, 4.5 pipe, 3/8-16
— Two 3/8-16 hex nuts, bronze
— Two 3/8 flat washers
— Two 3/8 split lock washers
One azimuth adjustment rod with hardware
Two pole mount clamps that attach with:
— Four 3/8-16 x 6.0" bolts, galvanized
— Four 3/8-16 hex nuts, galvanized
— Four 3/8 flat washers, galvanized
— Four 3/8 split lock washers, galvanized
One antenna mounting plate and hardware
One elevation adjustment rod with a brass cylinder
One antenna with a mounting flange
One outdoor unit (ODU)
NTXXXXXX Rel 3.0 Draft October 2000
Figure 6-1 and
Azimuth Azimuth adjustment
adjustment plate
rod
—continued—
Figure 6-2):
Elevation
adjustment rod
Brass
cylinder
Antenna mounting
plate
Direction of
Antenna
MOP0093p.eps