Cbl Lngth
To view the length of the cable in meters. This parameter applies for DS1
systems only.
Values:
0 to 40, 41 to 80, 81 to 121, 122 to 162, 163 to 200
Line Coding
To view the DS1 line coding parameter (AMI or B8ZS) for all tributaries in the
system. For an E1 system, the line coding is always HDB3.
Values:
0: AMI
1: B8ZS
Trib Stat
To view the status of tributaries 1 to 4. This parameter has two or four screens
(one for each tributary) that refer to the number of tributaries that the radio can
receive.
Values:
0: disable
1: enable
Mute
To view the status of the transmitter output.
Values:
0: the Tx output is enabled
1: the Tx output is muted (disabled)
Tx Freq Rng
To view the transmit frequency range.
Values:
17.7 & 19.7 (18 GHz)
21.2 & 23.6 (23 GHz)
Rx Freq Rng
To view the receive frequency range.
Values:
17.7 & 19.7 (18 GHz)
21.2 & 23.6 (23 GHz)
RSSI
To view the received signal strength indication (RSSI) value in dBm.
Values:
0 to -86/89 dBm (18 GHz with 4/2 tributaries)
0 to -85/88 dBm (23 GHz with 4/2 tributaries)
Temp
View the internal temperature of the ODU.
Values:
-128 to +127 °C
User guide NTXXXXXX Rel 3.0 Draft October 2000
User interface description 5-7