6-10 Installation and commissioning procedures
Procedure 6-2 (continued)
Installing the Internet BWA System 3200 on a pole
Step
12
13
Install the antenna on the mounting assembly
14
Figure 6-5
Antenna installation (1 of 2)
Internet BWA System 3200
Action
Use the pole clamps and hardware to attach the antenna mounting plate to
the pole as shown in
Figure 6-4 on page 6-9
Attach the galvanized flat washer, galvanized split lock washer and 3/8-16
galvanized hex nut to the end of the azimuth adjustment rod.
Place the brass cylinder in one of the elevation adjustment holes (for the best
elevation angle) on the antenna mounting flange (see
—continued—
NTXXXXXX Rel 3.0 Draft October 2000
and
Figure 6-2 on page
Figure
6-5).
ODU mounting slots
(4 places)
Elevation
adjustment holes
6-7.
MOP0094p.eps