6-8 Installation and commissioning procedures
Procedure 6-2 (continued)
Installing the Internet BWA System 3200 on a pole
Step
3
Figure 6-3
Antenna mounting flange
4
5
Attach the mounting assembly to the pole
6
Internet BWA System 3200
Action
Remove the four 1/4-20 screws that attach the antenna mounting flange to
the antenna (see
Figure
CAUTION
When rotating the flange, make sure that you do not
remove the feed from the reflector.
Carefully rotate the flange 180° so that the drain hole remains on the bottom.
Insert the four 1/4-20 screws that attach the antenna mounting flange to the
antenna.
Use a carpenter level to level the pole to ensure that the antenna remains flat
along the horizontal plane.
—continued—
NTXXXXXX Rel 3.0 Draft October 2000
6-3)
MOP0098p.eps
Antenna
flange screws
(4 places)