NEC UNIVERGE SV9500 User Manual page 55

0
STEP 5: Select Automatic,
able (see the following table).
Select an item by one of the following operations.
• Highlight an item by using
and press
0 2
• Press -
[RTP Alarm]
0
Automatic
1
Disable
2 Enable
Menu
No.
Items
Follow the setting on the System. If no
0 Automatic setting is made in the System, the
default setting (Alarm=ON) is applied.
Follow the setting on the terminal
1 Disable
(OFF).
Follow the setting on the terminal
2 Enable
(ON).
For the setting on the System, contact the System
TIP
Administrator.
TIP
Default setting is Automatic.
TIP
The enabled item is highlighted.
1
Disable or
or UP/DOWN soft key,
or OK.
, and press or OK.
1/1
Back OK
Descriptions
2 • TO ENABLE/DISABLE DTMF TONE
En-
The procedure below shows how to enable/disable
DTMF Tone.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select
Select an item by one of the following operations.
• Highlight an item by using
• Press
[Setting]
1
2
3
STEP 3: Select
Select an item by one of the following operations.
• Highlight an item by using
• Press
47
1
User Setting.
and press , or OK.
1
.
User Setting
Download
Data Backup/Restore

Menu
2
Talk.
and press , or OK.
2
.
or UP/DOWN soft key,
1/1
OK
or UP/DOWN soft key,