To Place A Call On Exclusive Hold; To Transfer A Call - NEC UNIVERGE SV9500 User Manual

TO PLACE A CALL ON EXCLUSIVE
HOLD
This feature allows a user to place a call on hold and to
exclude all other users from retrieving the Held Call.
STEP 1: While engaged in a Two-party call:
STEP 2: Press
HOLD
lows:
E_HOLD
1:25 PM MON 11 MAY 2015
Mic
STEP 3: Replace the handset.
• TO RETRIEVE
STEP 1: Lift handset or press
STEP 2: Press the Line Key. The conversation is re-
established.
Only the telephone that set Exclusive Hold option can
Note
retrieve the call.
• IF UNANSWERED
STEP 1: After preprogrammed time, Automatic Recall
is initiated.
STEP 2: Call Indicator lamp flashes and the user
hears Automatic Recall Ringer.
twice. The LCD displays as fol-
Held Station Number
XXXX
>>>
.
Speaker

TO TRANSFER A CALL

STEP 1: During a conversation, press
ceive Special Dial Tone. The first party is
placed on hold and hears the music on hold.
TRANSFER
1:25 PM MON 11 MAY 2015
Mic
STEP 2: Dial the destination party's number. Receive
Ringback Tone.
TRANSFER
1:25 PM MON 11 MAY 2015
Mic
STEP 3: The destination party answers the call. An-
nounce the call to the destination party.
STEP 4: Replace the handset. The transfer is com-
plete.
114
. Re-
Transfer
>>>
Destination station
or trunk number
XXXX
>>>