NEC UNIVERGE SV9500 User Manual page 125

One-Touch Speed Calling key for feature access:
One-Touch Speed Calling key may be used as a fea-
ture key by storing the feature access code. The fea-
tures may be programmed on a system basis by the
TIP
Telephony Server Administrator.
Access codes may be stored in conjunction with tele-
phone numbers. For example, one button can be pro-
grammed by the user to transfer to a certain extension.
• TO REGISTER NAME ONTO ONE-
TOUCH SPEED CALLING KEY
STEP 1: Press NAME.
Push Speed Calling Key
1:25 PM MON 11 MAY 2015
NAME
STEP 2: Press a desired One-Touch Speed Calling
key.
^
 
For the key to which no name information is registered,
TIP
the character "SPD" will be displayed.
STEP 3: Enter desired name on the keypad. Display
indicates the name entered.
>>>
BK >>>
NEC BNET
 
STEP 4: Press >>> twice to display the following soft
keys.
NEC BNET
SET
STEP 5: Press SET to save the entered name.
1:25 PM MON 11 MAY 2015
NAME
To delete the entry, press DEL or BK and delete each
TIP
one character.
To delete the whole setting, press CLEAR and back to
TIP
idle status.
117
^
BK >>>
^
CLEAR CANCEL >>>
>>>