NEC UNIVERGE SV9500 User Manual page 229

• To switch the terminal mode
When the Bluetooth
and a mobile phone is completed, you can switch
the terminal mode ("Wired Telephone" mode/"Mo-
bile Phone" mode) by pressing the Path key.
The Path key indicates the mode status with the
lamp color and the flashing status. When the Path
key lights or flashes orange, the terminal is in Wired
Telephone mode. When Path key lights or flashes
green, the terminal is in Mobile Phone Mode.
For details of the Path key lamp status, see the ta-
ble below.
Lamp
Flashing
Indication Mode
Periods
Patterns
Wired
Lighting
- Telepho
Orange
ne Mode
Slow
Light
Wired
Flash
Flashing
Telepho
Orange
ne Mode
Quick
Flash
Burst
Flash
Mobile
Lighting
- Phone
Green
Mode

connection between DT830G
Status
Indicates that the mobile
phone is idle or not
connected.
Indicates that the mobile
phone is originating a call
or terminal is talking
through the DT terminal.
Indicates that the mobile
phone is playing music.
Indicates that you are
talking on your mobile
phone.
Indicates that the mobile
phone is ringing.
Indicates that the
terminal is idle on the
system line or ringing.
Lamp
Flashing
Indication
Periods
Patterns
Flashing Quick
Green Flash
The flashing periods of Path key are as follows.
0ms
Flashing
Periods
Slow
Light
Flash
Quick
Flash
Burst
Flash
Light
221
Mode Status
Mobile Indicates that the
Phone terminal is talking
Mode through the system line.
250ms 500ms 750ms 1000ms