NEC UNIVERGE SV9500 User Manual page 238

STEP 6: After a tone indicating the start of playback,
the recorded call will be played.
You can control the playback of a recorded call as fol-
lows:
• Press Top to play the call from the beginning
• Press Stop to finish playing, and go to STEP 7.
• Press Pause to pause playing.
[Playing]
18/MAY/2015 (MON) 11:00 (♪0:10:12)
7205
Top Stop Pause
STEP 7: When the playback of the recorded call has
finished, the following message appears.
You can navigate through the recorded calls as follows.
• Press "↑" to display a newer recording data
• Press "↓" to display a older recording data
• Press Back, and a screen switching message appears
on the LCD. Then, go to STEP 8.
• Press Play to play the call recording data again.
[Playing]
18/MAY/2015 (MON) 11:00 (♪0:10:12)
7205
Play has been finished.
230
Back
 Play