NEC UNIVERGE SV9500 User Manual page 131

STEP 3: Enter the desired phone number (up to 32
digits can be registered).
Cancel Clear
STEP 4: Press Regist key. Then, "Registration com-
plete!" is displayed for 3 seconds.
Entry is added!
1:25 PM MON 11 MAY 2015
SPD Set
One-Touch Speed Calling during the registration opera-
tion. Also, pressing any other key (Exit, SPD Set, or
Note
Cancel) cancels the setting. In that case, the terminal
operates in accordance with the pressed operation key.
When you receive an incoming call on the accommo-
dated line while programming the One-Touch Speed
Calling key, you can continue with the programming
Note
without answering the call. However, if you answer the
call, the conversation will be started and the registration
operation will be canceled.
A new entry overwrites the previously saved phone
Note
number (the existing number temporarily displays when
you try to set a new number).
08211XX
Set >>>
Mic NoDist
To Replace the Existing Data Assigned to
a One-Touch Speed Calling Key with New
Data Using SPD Set Key
STEP 1: Press the SPD Set.
1:25 PM MON 11 MAY 2015
SPD Set
STEP 2: Press desired One-Touch Speed Calling
key.
Push Speed Calling Key
1:25 PM MON 11 MAY 2015
SPD Set
STEP 3: The phone number already registered is dis-
played. Press
ReRegi
STEP 4: Enter desired phone number (up to 32 digits
can be registered).
Cancel
STEP 5: Press Regist key. Then, "Registration com-
plete!" is displayed for 3 seconds.
Entry is added!
1:25 PM MON 11 MAY 2015
SPD Set
123
Mic NoDist
Mic NoDist
key or Edit soft key.
08211XX
Edit Delete >>>
08211XX
Clear Set >>>
Mic NoDist