Connecting Ac Adapter; Connecting Lan Cable - NEC UNIVERGE SV9500 User Manual

CONNECTING AC ADAPTER

STEP 1: Insert an AC adapter plug into the connector
of the AC adapter (AC-L UNIT) on the back of
telephone.
STEP 2: Run the AC adapter cord through the groove
on the back of telephone, and lock it in place.
AC Adapter Plug AC Adapter Cord
When you remove the AC adapter from the terminal,
Note
disconnect the LAN cable beforehand.
Connector for AC Adapter
Telephone
Groove

CONNECTING LAN CABLE

STEP 1: Prepare 10 BASE-T/100 BASE-T/TX
1000BASE-T cables (Straight) for connecting
the telephone to network devices such as
HUB, PoE Switch.
STEP 2: Connect the telephone to the network device
using the LAN cable.
STEP 3: Thread the LAN cable through the groove on
the back of the telephone.
Telephone
LAN Straight Cable
When you connect the LAN cable to a PC, connect the
Note
LAN cable to the terminal's PC port and the PC.
32
To LAN
To PC
Groove