NEC UNIVERGE SV9500 User Manual page 177

[Ring Tone]
1
Automatic
2
Default
3
Tone Type 1
4
Tone Type 2
5 Tone Type 3
6 Tone Type 4
7 Tone Type 5
8 Tone Type 6

You can set ringer tone for calls routed from the specific
name (calling party) here. Ringer Tone type can be set
Note
for "Name", "Group" and "Telephone set". The ringer
Tone type set for "Name" has higher priority than the
types set for "Group" and "Terminal set".
Set Default when you don't want to change the ringer
tone here. The setting for "Group" or "Telephone set" is
Note
applied. Also, when Automatic is set, Tone Type 1 is
automatically applied.
For details on each ringer tone type, see
TIP
RINGER TONE.
STEP 16:The display goes back to the Edit screen. Se-
9
lect Illumination.
Select an item by one of the following operations.
• Highlight an item by using
or OK.
• Press 9 .
1/3
OK
Back
TO SET
, and press ,
[Edit]
9
Illumination
No
0
0
Save
STEP 17:Select a desired color of the Call Indication
lamp.
Select an item by one of the following operations.
• Highlight an item by using
and press
• Press the digit key of desired number, and press
or OK.
For example, press
[Illumination]
1
Automatic
2
Default
3
Disable
4
Red
5
Green
6
Yellow
7 Blue
8 Light Blue
169
2/2
Back
OK
or UP/DOWN soft key,
or OK.
1 0 10
+ to select
1/2
 Back OK
White.