NEC UNIVERGE SV9500 User Manual page 155

• TO UNLOCK THE TELEPHONE
STEP 1: Display the Password Entry screen by either
of the following operations.
• Press any key while the screen saver is
activated.
• Press Security while the screen saver is
activated.
Security lock will be released.
Please input a password.
BK
STEP 2: Enter the password and press
OK. Security Lamp goes off and Security
Mode is canceled.
The default password to release a security lock is 0000.
Be sure to change the default password before placing
Note
the telephone in security mode. For details on the pass-
word setting, see
nal Setup.
When the password entry ends in failure, the following
TIP
error message is issued. In that case, press
and retry.
Cancel OK
(Enter)
TO CHANGE PASSWORD in Termi-
After a third attempt (if incorrect password is entered
three times consecutively), the following error message
is issued. Press
TIP
and any key operation will be disabled for 10 minutes.
Wait for 10 minutes, make a retry. Please note emer-
gency calls cannot be completed during the 10 minutes
terminal lock out period.
or
or OK
147
Password Error.
Retry?
Cancel OK
or OK. The telephone locks up,
Incorrect security code
password entered.
OK