NEC UNIVERGE SV9500 User Manual page 242

STEP 4: After a tone indicating the start of playback,
the recorded call will be played.
You can control the playback of a recorded call as fol-
lows:
• Press Top to play the call from the beginning
• Press Stop to finish playing, and go to STEP 5.
• Press Pause to pause playing.
[Playing]
18/MAY/2015 (MON) 11:00 (♪0:10:12)
7205
Top
STEP 5: When the playback of the recorded call has
finished, the following message appears.
You can navigate through the recorded calls as follows.
• Press "↑" to display a newer recording data
• Press "↓" to display a older recording data
• Press Back, and a screen switching message appears
on the LCD. Then, go to STEP 6.
• Press Play to play the call recording data again.
Stop Pause
[Playing]
18/MAY/2015 (MON) 11:00 (♪0:10:12)
7205
Play has been finished.
STEP 6: Go on-hook or wait for 3 seconds after the
message appears, then, you are back to the
incoming call screen.
[Playing]
18/MAY/2015 (MON) 11:00 (♪0:10:12)
7205
A screen is switched over.
Play has been finished.
Please onhook.
234
Back
 Play
Back
 Play