NEC UNIVERGE SV9500 User Manual page 272

Menu Item
4 Change Password
5 Security
6 Peripherals
1.USB Memory
2.BCA Option
1.BCA Connection
Settings
1. Auto
Connection
2. Connection
Cycle
2.Interrupt Ringing
3.Smart Device
Type
4.Auto Path Switch
5.Illumination
7 Usability
1.Help Key Mode
0 Setting Reset
Description
Select this option to change the password to lock/unlock the
telephone.
Not used.
Select this option to setup the usage of the peripheral equip-
ment of DT830G.
Select this option to set up for replacing a USB memory from
the terminal.
Select this option to configure the BCA.
Select this option to make the BCA connection settings.
Select this option to use Auto Connection.
(Disable/Enable)
Select this option to set Bluetooth connection cycle.
(3 Seconds/10 Seconds/1 Minute/10 Minutes)
Select this option to specify whether to use Interrupt Ringing.
(Disable/Enable)
Select this option to set the type of Smart Device. (Type 1/
Type 2)
Select this option to specify whether to use Auto Path Switch.
(Disable/Enable)
Select this option to Set the illumination pattern (color) for
informing call termination. (Disable/Red/Green/Blue/Yellow/
Purple/Light Blue/White/Rotation)
Select this option to set up for the operation of the Help key
while a pop-up window is displayed.
Select this option to set up for Help Key Mode (SubMenu/
Popup Window)
Select this option to reset the telephone settings.
264
Default Value
0000
-
-
-
-
Enable
10 seconds
Enable
Type 1
Enable
Blue
-
SubMenu
-