To Edit The Registered Data - NEC UNIVERGE SV9500 User Manual

One-Touch Speed Calling during the registration opera-
tion. Also, pressing any other key (Exit, SPD Set, or
Note
Cancel) cancels the setting. In that case, the terminal
operates in accordance with the pressed operation key.
When you receive an incoming call on the accommo-
dated line while programming the One-Touch Speed
Calling key, you can continue with the programming
Note
without answering the call. However, if you answer the
call, the conversation will be started and the registration
operation will be canceled.
A new entry overwrites the previously saved phone
Note
number (the existing number temporarily displays when
you try to set a new number).

TO EDIT THE REGISTERED DATA

To Enter the Phone Number
STEP 1: Locate the cursor (underscore) with ← / →
soft key (these soft keys are displayed press-
ing >>> soft key), or pressing
STEP 2: Enter desired phone number.
Cancel
If the entered number exceeds 24 digits, the digits fol-
Note
lowing the 24th digit are displayed on the upper row of
LCD. Phone number can be entered up to 32 digits.
To Enter Hooking
STEP 1: Press Hooking soft key (this soft keys is dis-
played pressing >>> soft key twice).
Hook
STEP 2: Hooking is indicated as "!" on the LCD.
Pause
Hooking can be put only at the beginning of a number,
Note
and so Hooking key displays only before entering any
number.
124
08211XX
Clear Set >>>
_
Delete >>>
!_
Delete >>>
/
.