Table of Contents
Advertisement
Note
Make sure the lens support pedestal is perpendicular to the lens support pedestal attachment screw, and then tighten.
Turn the clamp lever for the lens support pedestal attachment screw clockwise to lock the lens support
13
pedestal attachment screw.
A: Lens support pedestal attachment screw
B: Attachment screw hole
C: Lens support pedestal attachment screw clamp lever
Hint
If a clamp lever is in a position that makes it difficult to turn, release the clamp lever and rotate it to an angle that will make
operation easier. When in the desired position, close the clamp lever.
A: Lens support pedestal attachment screw clamp lever
B: Lens support rod clamp lever
Turn the two lens support rod clamp levers clockwise to secure the lens support unit.
14
Check that both levers are tightened and not loose, the lens is attached correctly, and that the lens
15
switches are set correctly.
If a lever is loose or the lens is not attached correctly, the lens may fall and become damaged.
91
Advertisement
Table of Contents
