Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K
Recording RAW Video
You can record the RAW video signal output from the SDI OUT connector of the unit to a supported external recorder.
The supported RAW output formats are shown below.
System frequency
59.94 / 50 / 29.97 / 25 / 23.98
24
Connect an external RAW recorder to the SDI OUT connector of the unit.
1
Set [Project] > [Base Setting] > [Shooting Mode] to [Cine EI] in the web menu or camera menu.
2
Set the angle of view (FF only) using [Project] > [Rec Format] > [Imager Scan Mode] in the web menu or
3
camera menu.
Set [Project] > [Rec Format] > [Codec] to [RAW] in the web menu or camera menu.
4
Selecting [RAW&XAVC-I] will simultaneously record video to the external RAW recorder and video to the memory
cards in the unit.
Set the resolution using [Project] > [Rec Format] > [RAW Output Format] in the web menu or camera menu.
5
Check that the external recorder is turned on, then press the record START/STOP button on the live
6
operation screen.
The RAW video recording status is indicated by an icon in the camera image panel.
[Codec]
[RAW Output Format]
RAW
4096×2160
RAW
3840×2160
RAW & XAVC-I
4096×2160
RAW & XAVC-I
3840×2160
RAW
4096×2160
RAW & XAVC-I
4096×2160
231
Advertisement
Table of Contents
