Sony ILME-FR7 Help Manual page 413

Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K
Synchronizing the Phase of the Video Signal (Genlock)
You can supply a reference signal to the GENLOCK connector to enable genlock.
The input reference signals that can be used vary depending on the system frequency of the selected recording format.
System frequency of recording format
59.94P
50P
29.97P
25P
24P
23.98P
59.94i
50i
You can check the external sync status using [Technical] > [Genlock] > [Reference] in the camera menu.
Note
If the reference signal is unstable, genlock cannot be achieved.
The subcarrier is not synchronized.
Supported input reference signals
1920×1080 59.94i
720×486 59.94i
1920×1080 50i
720×576 50i
1920×1080 59.94i
720×486 59.94i
1920×1080 50i
720×576 50i
1920×1080 24PsF
1920×1080 23.98PsF
1920×1080 59.94i
720×486 59.94i
1920×1080 50i
720×576 50i
5-041-957-11(1) Copyright 2022 Sony Corporation
413