Table of Contents
Advertisement
Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K
Setting the Pan/Tilt Operating Speed
You can change the pan/tilt operating speed using the [Pan-Tilt Speed] slider in the camera control panel by operating
the joystick in the framing control panel.
Press the
(Main) tab in the camera control panel.
1
Select the [Pan-Tilt Speed] slider from the list.
2
If the [Pan-Tilt Speed] slider is not displayed, select either of the two slider function selection buttons to display the
slider.
Move the slider knob left or right.
3
Moving the knob to the left decreases the operating speed, while moving the knob to the right increases the
operating speed.
Note
If there is a wall or other obstacle within the range of motion of the camera, be careful not to hit the camera or lens during pan/tilt
operation.
The pan/tilt acceleration depends on physical characteristics, such as the weight balance of the lens. You can change the
acceleration setting using [Pan-Tilt] > [P/T Acceleration] > [Ramp Curve] in the web menu or camera menu.
5-041-957-11(1) Copyright 2022 Sony Corporation
133
Advertisement
Table of Contents
