Table of Contents
Advertisement
Use the supplied screw. The use of a screw other than the supplied screw may reduce the effectiveness of the wire
rope function.
Note
It is recommended that one person holds the unit as shown in the following diagram while another person mounts the unit.
Do not hold the camera head or lens support while mounting the unit. There is a risk of damage or injury if the unit is
dropped or falls.
Take care when wiring that electrical connectors and cables do not become short-circuited by the fall prevention wire rope.
The mount can support a suspended mass of up to 8.8 kg (19 lb 6.4 oz) (including the lens). To prevent the unit falling, do
not exceed the maximum expected mass.
Align the screw hole (A) on the body bracket with the ◇ hole (B) on the ceiling bracket, insert the unit and
8
turn it about 60 degrees clockwise until the screw hole (A) and the screw hole (C) are aligned.
79
Advertisement
Table of Contents
