Sony ILME-FR7 Help Manual page 418

Help Guide
Interchangeable Lens Digital Camera
ILME-FR7 / ILME-FR7K
Outputting an Optical Fiber Signal
You can output an SDI signal converted to an optical signal by connecting an SFP+ module (option) to the OPTICAL
connector of the unit. Use an SFP+ module that matches the signal band of each format.
Signal band
4K (59.94p, 50p): 12G
4K (other than 59.94p, 50p): 6G
HD (59.94p, 50p): 3G
HD (other than 59.94p, 50p): 1.5G
Note
Use a module that complies with the following standards.
SFF standards
SFF-8083/SFF-8418/SFF-8419*/SFF-8432/SFF-8433/SFF-8071/SFF-8472
* Power Level I (1.0 W)
SDI standards
ST297/ST292/ST424/ST425/ST2081/ST2082
The same signal as the SDI output connector is output to the SFP+ module.
The unit does not support optical fiber signal input.
Use an SFP+ module for optical fiber signal output. For details about verified SFP+ modules, contact your dealer or Sony service
representative.
5-041-957-11(1) Copyright 2022 Sony Corporation
418