Sony ILME-FR7 Help Manual page 21

For details, see "Error/Warning
When configured as a tally lamp, the lamp lights up red or green according to the external tally signal.
For details, see "Connecting a Tally
3.
Image sensor
Note
Do not touch directly with your hands.
4.
Lens release button
Press to remove the lens.
For details, see "Removing a
5.
Lens signal contacts
Note
Do not touch directly with your hands.
6.
POWER lamp
7.
NETWORK lamp
The state of the unit is indicated by the combination of display color and lit status (lit, blinking, not lit) of the POWER
lamp and NETWORK lamp.
POWER NETWORK
lamp lamp
Lit green
Lit
*1
green
Not lit
Blinking
Not lit
green
Lit
Not lit
orange
Blinking
Not lit
yellow
Blinking Blinking
orange green
*2 *2
slowly slowly
Blinking Blinking
orange green
*3 *3
rapidly rapidly
*1
Blinks green when a command is received from the supplied infrared remote control.
*2
Blinking slowly: Blinking once per second
*3
Blinking rapidly: Blinking four times per second
8.
Infrared remote control sensor
Receives the control signal from the supplied infrared remote control.
Messages."
Signal."
Lens."
Unit status
Power-on (network connected)
Power-on (network not connected)
Power-on process in progress
Power standby state
Software update in progress
The unit cannot operate normally. For details, view the system log. If the problem
persists even after putting the unit in standby mode or turning the power off and then on
again, contact your Sony service representative.
A malfunction occurred on the unit. Contact your Sony service representative.
21