Copying Clip - Panasonic HC-X2 Operating Instructions Manual

Playback – Copying clip

Copying clip

Clips can be copied between memory cards.
Only the clip recorded in AVCHD can be copied.
1
Press the <THUMBNAIL> button.
The thumbnail screen is displayed.
2
Press the <MENU> button while the thumbnail screen is displayed.
The menu is displayed.
3
Select the [THUMBNAIL] menu
•
Selecting [ALL] copies all the clips between the memory cards.
4
Select the card slot for the copy destination.
[SLOT1→SLOT2]:
Copies clips from the memory card in card slot 1 to the memory card in card slot 2.
[SLOT2→SLOT1]:
Copies clips from the memory card in card slot 2 to the memory card in card slot 1.
The clips on the memory card of the copy source is displayed in the thumbnail screen.
5
Select the clip to copy in the thumbnail screen.
is displayed on the selected clip.
6
Select [ ].
0001 0001 0002 0002
00:08:17.15 00:08:17.15 00:08:47.15 00:08:47.15
0004 0004 0005 0005
00:09:32.15 00:09:32.15 00:09:50.15 00:09:50.15
0007 0007 0008 0008
00:10:20.15 00:10:20.15 00:10:38.15 00:10:38.15
•
This can also be selected by pressing and holding the multidial.
7
When the confirmation message is displayed, select [SET].
Progress bar is displayed, and the copy of the clip starts.
•
To cancel the copy midway, select [CANCEL].
8
When the completion message is displayed, select [
When deleting clips after copying is complete, before deletion make sure you play back the copied clip to confirm
that it has been copied properly.
•
When there are a large number of clips, it may take longer to copy the clips.
•
The clip whose recording file format is MOV/MP4 cannot be copied.
•
The copy is not possible when the volume of the selected clip is larger than the available card capacity of the destination.
•
The copy is not possible when the copy destination card is write protected.
•
The copy is not possible when the maximum number of the clips will exceed.
•
The copy is not possible when the maximum number of the playlist will exceed.
•
It may not be possible to copy clips recorded on other equipment. Data that was recorded on a computer cannot be copied.
•
The protection setting for clips is cleared when they are copied.
•
The order of clips copied cannot be changed.
[CLIP]
0003 0003
00:09:11.00 00:09:11.00
0006 0006
00:10:08.00 00:10:08.00
0009 0009
00:10:52.15 00:10:52.15
[COPY] [SELECT].
].
233