[Audio] Menu - Panasonic HC-X2 Operating Instructions Manual

Menu – [AUDIO] menu

[AUDIO] menu

Sets the input/output function of audio.
[INPUT SETTINGS]
[INPUT1 MIC LEVEL]
Sets the input level of the external microphone connected to the <AUDIO INPUT1> terminal. Enabled when the external
microphone is connected and the <INPUT 1> switch is set to <MIC> or <i48V>.
The items that can be set are as follows.
≥[j40dB], [j50dB], [j60dB]
(Factory setting: [j50dB])
[INPUT2 MIC LEVEL]
Sets the input level of the external microphone connected to the <AUDIO INPUT2> terminal. Enabled when the external
microphone is connected and the <INPUT 2> switch is set to <MIC> or <i48V>.
The items that can be set are as follows.
≥[j40dB], [j50dB], [j60dB]
(Factory setting: [j50dB])
[INPUT1 LINE LEVEL]
Sets the audio input level of the audio device connected to the <AUDIO INPUT1> terminal. Enabled when the audio device is
connected and the <INPUT 1> switch is set to <LINE>.
The items that can be set are as follows.
≥[4dB], [0dB]
(Factory setting: [0dB])
[INPUT2 LINE LEVEL]
Sets the audio input level of the audio device connected to the <AUDIO INPUT2> terminal. Enabled when the audio device is
connected and the <INPUT 2> switch is set to <LINE>.
The items that can be set are as follows.
≥[4dB], [0dB]
(Factory setting: [0dB])
[REC CH SETTINGS]
[CH1 LEVEL]
Sets if the recording level adjustment method for audio channel 1 is to be automatic or manual.
If [AUDIO CH1 LEVEL] is assigned to a USER button, [AUTO]/[MANUAL] can be switched by operating the USER button.
The items that can be set are as follows.
≥[AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH2 LEVEL]
Sets if the recording level adjustment method for audio channel 2 is to be automatic or manual.
If [AUDIO CH2 LEVEL] is assigned to a USER button, [AUTO]/[MANUAL] can be switched by operating the USER button.
The items that can be set are as follows.
≥[AUTO], [MANUAL]
(Factory setting: [AUTO])
[CH1 MIC LOWCUT]
Switches enable/disable of the lowcut filter for audio channel 1.
The items that can be set are as follows.
≥[ON], [OFF]
(Factory setting: [OFF])
[CH2 MIC LOWCUT]
Switches enable/disable of the lowcut filter for audio channel 2.
The items that can be set are as follows.
≥[ON], [OFF]
(Factory setting: [OFF])
94