Table of Contents
Advertisement
Menu – [VIDEO OUT/LCD/VF] menu
[HDMI SETTING]
[OUT FORMAT]
Selects the signal to output from the <HDMI> terminal. The items that can be selected differ depending on the [SYSTEM] menu
[FREQUENCY]/[FILE FORMAT]/[REC FORMAT] setting.
[3840×2160p]
[3840×2160p(420/8bit)]
[1920×1080p]
[1920×1080i]
[1280×720p]
[720×480p]
[720×576p]
(Factory setting: [1920×1080p])
•
For the combinations that can be set (
[HDMI TC OUT]
Sets whether time code information is output from the <HDMI> terminal.
The items that can be set are as follows.
≥[ON], [OFF]
(Factory setting: [OFF])
[HDMI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <HDMI> terminal (such as recorder) is to be
controlled or not. This can be set when [HDMI TC OUT] is enabled.
[ON]
[OFF]
(Factory setting: [OFF])
•
This cannot be set when the [RECORDING] menu
•
(For the
)
When all of the following menu settings have been made, it is possible to control recording by external devices connected to
the <SDI OUT> terminal and the <HDMI> terminal.
– [VIDEO OUT/LCD/VF] menu
– [VIDEO OUT/LCD/VF] menu
– [VIDEO OUT/LCD/VF] menu
– [VIDEO OUT/LCD/VF] menu
[HDMI OUT CHAR]
Sets whether to superimpose the character to the output from the <HDMI> terminal.
[ON]
[OFF]
(Factory setting: [OFF])
[HDMI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <HDMI> terminal. The settings of the zebra signal follow
the zebra signal settings in the [VIDEO OUT/LCD/VF] menu
[ON]
[OFF]
(Factory setting: [OFF])
/ [HDMI OUT]
Outputs in 3840×2160p (4:2:2/10 bit).
Outputs in 3840×2160p (4:2:0/8 bit).
Outputs in 1920×1080p.
Outputs in 1920×1080i.
Outputs in 1280×720p.
Outputs in 720×480p.
Outputs in 720×576p.
Format that can be output from the HDMI terminal:
Controls the recording operation of the external equipment.
Does not control the recording operation of the external equipment.
[VIDEO OUT SEL]
[SDI SETTING]
[SDI REC REMOTE]
[HDMI SETTING]
[HDMI SETTING]
Superimposes.
Does not superimpose.
Superimposes.
Does not superimpose.
[REC FUNCTION]
[REC MODE] is set to [INTERVAL].
[SDI + HDMI OUTPUT]
[ON]
[HDMI TC OUT]
[ON]
[HDMI REC REMOTE]
[EI ASSIST].
99
240)
[ON]
[ON]
Advertisement
Table of Contents
