Copying Your Tapes (Dubbing) - Panasonic Palmcorder PalmSight PV-L857 Operating Instructions Manual

Copying your Tapes (dubbing)
Before you begin...
* Connect the Palmcorder to VCR as shown 1 Insert a pre-recorded tape
below. :
. into the Palmcorder and a blank
* Turn ON both units.
z
:
* Set the recording VCR's Input Signal
CR with a recording tab into your
Selector to LINE.
* Set the Palmcorder POWER
switch to VCR. 2 Press PLAY on the Palmcorder and
when you find the starting point, press
STILL.
3 Press PLAY and REC together on
your VCR and then immediately
Source (Playing) press STILL/PAUSE.
Palmcorder
PAUSE/STILL STOP REW PLAY FF REC
VCR Buttons
4 Press STILL on the Palmcorder
and press STILL/PAUSE on the
VCR to simultaneously start both
units.
Audio/Video Out
(To View)
Audio/Video Cable
(supplied)
o
o
(D
O
y
nl
D
e
et
C
=|
O
0
VHF Connecting Cable 5 Press STOP on both units
(not supplied)
when dubbing is complete.
Recording:
Note:
* Tapes recorded on other VCRs and used
for playback in the Palmcorder must be
To Video In recorded in SP or SLP mode.
copyrighted recordings may be copyright
37