Special recording function – Interval recording
Interval recording
The unit will record 1 frame at each set time interval.
It is possible to record a short clip of a long slow-moving scene, such as a sunset, by recording with intervals between frames.
(A)
(C)
(A) 1 frame recording
(B) (Time)
(C) Time set in [INTERVAL TIME]
1
Select the [SYSTEM] menu
2
Select the [RECORDING] menu
[INTRVL] is displayed in the special recording function display of the camera image screen.
3
Set the time in the [RECORDING] menu
4
Press the REC button.
•
[I-REC] is displayed in red in the special recording function display of the camera image screen.
•
The unit will repeat the operation of one frame recording at set time interval.
•
To stop recording, press the REC button.
•
Set [NORMAL] in the [RECORDING] menu
•
In the following cases, [REC MODE] is fixed to [NORMAL].
– When [SYSTEM] menu
•
The setting is cleared when the power is turned off.
•
Audio is not recorded.
•
Recorded data (data recorded until recording was stopped) is included in 1 clip.
•
The [RECORDING] menu
•
The [RECORDING] menu
•
(For the
)
The [VIDEO OUT/LCD/VF] menu
SETTING]
[HDMI REC REMOTE] do not work.
(For the
)
The [VIDEO OUT/LCD/VF] menu
•
When [REC MODE] is set to [INTERVAL], the [DEL LAST CLIP] assigned to the USER button does not work.
•
If the length of the clip is less than 3 seconds when the recording is stopped, the image of the final frame will be recorded to
make the length of the clip to 3 seconds.
•
Depending on the light source and the scene being recorded, color hue and focus may not be automatically set. In case
such as this, try adjusting manually. (
•
When recording for long periods, it is recommended to connect to the AC adaptor for recording.
•
The recording is stopped once when the length of the clip exceeds 10 hours in the interval recording. The recording is
automatically resumed after few seconds.
•
There are recording functions that cannot be used simultaneously. (
simultaneously:
297)
(A)
(C)
[FILE FORMAT]
[REC FUNCTION]
[REC FUNCTION]
[FILE FORMAT] is set to [MP4] or [AVCHD]
[TC/UB]
[FREE/REC RUN] is fixed to [REC RUN].
[TC/UB]
[DF/NDF] is fixed to [NDF].
[SDI SETTING]
[SDI REC REMOTE] and the [VIDEO OUT/LCD/VF] menu
[HDMI OUT]
[HDMI REC REMOTE] does not work.
Focusing (manual focus):
(A)
(B)
[MOV].
[REC MODE]
[REC FUNCTION]
[REC MODE] to clear the setting.
156,
Adjusting the white and black balance:
Recording function that cannot be used
202
[INTERVAL].
[INTERVAL TIME].
[HDMI
163)