Table of Contents
Advertisement
Menu – [SCENE FILE] menu
[DRS]
Switches enable/disable of the dynamic range stretcher function.
If the function is assigned to a USER button, [ON]/[OFF] can be switched by operating the USER button.
The items that can be set are as follows.
≥[ON], [OFF]
[DRS EFFECT DEPTH]
Sets the compression level of the high luminosity areas of the dynamic range stretcher function.
By compressing the video signal levels of the high luminosity areas that are blown out in normal shooting, the dynamic range
can be expanded.
The items that can be set are as follows.
≥[1]...[3]
•
As the number increases, the compression level of high luminosity areas increases, and there will be more noise in dark
areas.
[NR CONTROL]
You can adjust the effect of noise reduction and afterimages by changing the noise reduction settings.
[−7]...[−1]
[0]
[+1]...[+7]
[AE LEVEL]
Switches enable/disable of the AE level function.
If the function is assigned to a USER button, [ON]/[OFF] can be switched by operating the USER button.
The items that can be set are as follows.
≥[ON], [OFF]
•
In the following cases, this cannot be set.
– When all of iris, gain, and shutter speed are set to manual in the manual mode
– When IR recording is enabled
[AE LEVEL EFFECT]
When AE level is enabled, you can set the exposure compensation value.
Set to the "+" direction to brighten and set to the "−" direction to darken.
The items that can be set are as follows.
≥[−2.0EV]...[+2.0EV]
•
In the following cases, this cannot be set.
– When all of iris, gain, and shutter speed are set to manual in the manual mode
– When IR recording is enabled
Weakens the effect of noise reduction, reducing afterimages. There will tend to be more noise.
Standard state
Strengthens the effect of noise reduction, reducing noise. However, this may result in an increase in
afterimages.
93
Advertisement
Table of Contents
