Table of Contents
Advertisement
Convenient shooting functions – Zebra patterns display
Zebra patterns display
The unit can display 2 types of zebra patterns to the output image from the LCD monitor.
1
Select the [VIDEO OUT/LCD/VF] menu
•
You can also either press the USER button assigned to [ZEBRA] or touch the USER button icon to display the zebra
pattern and switch display/hide.
This changes depending on the [VIDEO OUT/LCD/VF] menu
[ZEBRA] settings
[MOMENT]
[ON], [OFF]
Setting the detection level
1
Set each item in the [VIDEO OUT/LCD/VF] menu
[ZEBRA1 DETECT]:
Sets the detection level of zebra pattern 1.
[50%]...[105%]
[ZEBRA2 DETECT]:
Sets the detection level of zebra pattern 2.
[50%]...[105%]
[ZEBRA2]:
Switches enable/disable of zebra pattern 2.
[ON], [OFF]
Display area of the zebra pattern
The display area of the zebra pattern varies depending on the [VIDEO OUT/LCD/VF] menu
(A)
(1)
[105%]
(B)
(C)
[0%]
(A) [ZEBRA2]
(B) [ZEBRA2 DETECT]
(C) [ZEBRA1 DETECT]
(1) [ON]
(2) [OFF]
•
The zebra pattern cannot be recorded.
•
To record video with less overexposure, manually adjust the shutter speed and brightness (iris/gain) so that the zebra
pattern is no longer displayed. (
•
(For the
)
The zebra pattern is not displayed when the [SCENE FILE] menu
Displays the zebra pattern for approximately 5 seconds.
Switches display/hide of the zebra pattern.
(2)
Iris:
151,
Gain:
152,
Setting the shutter speed:
[EI ASSIST]
[ZEBRA]
[EI ASSIST]
[ZEBRA] settings.
Operation when the USER button is pressed
[EI ASSIST].
159)
[GAMMA MODE SEL]
205
[ON].
[EI ASSIST] setting.
[HLG]/[V-Log] is set.
Advertisement
Table of Contents
