Panasonic HC-X2 Operating Instructions Manual page 98

Menu – [VIDEO OUT/LCD/VF] menu
[SDI SETTING]
[SDI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <SDI OUT> terminal (such as recorder) is to be
controlled or not.
[ON]
[OFF]
(Factory setting: [OFF])
•
This cannot be set when the [RECORDING] menu
•
The AUTO REC signal is compatible with TYPE3 when remotely recording with SDI.
•
When all of the following menu settings have been made, it is possible to control recording by external devices connected to
the <SDI OUT> terminal and the <HDMI> terminal.
– [VIDEO OUT/LCD/VF] menu
– [VIDEO OUT/LCD/VF] menu
– [VIDEO OUT/LCD/VF] menu
– [VIDEO OUT/LCD/VF] menu
[SDI OUT CHAR]
Sets whether to superimpose the character to the output from the <SDI OUT> terminal.
[ON]
[OFF]
(Factory setting: [OFF])
[SDI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <SDI OUT> terminal. The settings of the zebra signal follow
the zebra signal settings in the [VIDEO OUT/LCD/VF] menu
[ON]
[OFF]
(Factory setting: [OFF])
[SDI OUT HDR]
Sets the output image from the <SDI OUT> terminal when the [SCENE FILE] menu
[SDR]
[HDR]
(Factory setting: [HDR])
[SDI OUT V-Log]
Sets the output image from the <SDI OUT> terminal when the [SCENE FILE] menu
[V-Log]
[V-709]
(Factory setting: [V-Log])
Controls the recording operation of the external equipment.
Does not control the recording operation of the external equipment.
[VIDEO OUT SEL]
[SDI SETTING] [SDI REC REMOTE]
[HDMI SETTING]
[HDMI SETTING]
Superimposes.
Does not superimpose.
Superimposes.
Does not superimpose.
Outputs in the standard dynamic range.
Outputs in the high dynamic range.
Outputs in same color as the recording image.
Outputs in a converted color equivalent to standard CINE-LIKE. Setting suitable for a preview.
[REC FUNCTION] [REC MODE] is set to [INTERVAL].
[SDI + HDMI OUTPUT]
[ON]
[HDMI TC OUT] [ON]
[HDMI REC REMOTE]
[EI ASSIST].
98
[ON]
[ON]
[GAMMA MODE SEL] is set to [HLG].
[GAMMA MODE SEL] is set to [V-Log].