Table of Contents
Advertisement
Adjustable settings when shooting – Brightness adjustment
Brightness adjustment
When the external light is strong, you can switch the ND filter (brightness adjustment filter) to use with the <ND FILTER> switch.
1
Change the setting of the <ND FILTER> switch.
ND1/64
ND1/16
(A) ND filter setting value
(B) Recommended ND filter setting value
<1/64>:
Reduces the amount of light entering the MOS sensor to 1/64.
<1/16>:
Reduces the amount of light entering the MOS sensor to 1/16.
<1/4>:
Reduces the amount of light entering the MOS sensor to 1/4.
<CLR>:
Does not use the ND filter.
•
If the selected setting <1/64>, <1/16> or <1/4> does not match an ND filter setting recommended by this unit, the
recommended setting will be displayed on the screen, blink for approximately 5 seconds and disappear.
•
The ND filter cannot be used when IR recording is enabled.
•
The recommended ND filter setting value may not be displayed correctly when the scene is too dark.
(B)
(A)
155
Advertisement
Table of Contents
