[Video Out/Lcd/Vf] Menu - Panasonic HC-X2 Operating Instructions Manual

Menu – [VIDEO OUT/LCD/VF] menu

[VIDEO OUT/LCD/VF] menu

Configures the settings for the external output, the information to display in the LCD monitor or viewfinder and the output format.
[VIDEO OUT SEL]
[SDI + HDMI OUTPUT]
Switches whether simultaneous output for the <SDI OUT> terminal and <HDMI> terminal is enabled or disabled.
[ON]
[OFF]
(Factory setting: [OFF])
[EXTERNAL OUT SEL]
Switches the output destination for images and audio. Can be set when [SDI + HDMI OUTPUT] is set to [OFF].
[SDI]
[HDMI]
(Factory setting: [HDMI])
[SDI OUT FORMAT]
Selects the signal to output from the <SDI OUT> terminal. The items that can be selected differ depending on the [SYSTEM]
menu [FREQUENCY]/[FILE FORMAT]/[REC FORMAT] setting.
[1920×1080p]
[1920×1080i]
[1920×1080PsF]
[1280×720p]
(Factory setting: [1920×1080i])
•
For the combinations that can be set (
[HDMI OUT FORMAT]
Selects the signal to output from the <HDMI> terminal. The items that can be selected differ depending on the [SYSTEM] menu
[FREQUENCY]/[FILE FORMAT]/[REC FORMAT] setting.
[3840×2160p]
[3840×2160p(420/8bit)]
[1920×1080p]
[1920×1080i]
[1280×720p]
[720×480p]
[720×576p]
(Factory setting: [1920×1080p])
•
For the combinations that can be set (
[LCD/VF OUTPUT]
Sets the display method of the LCD monitor/viewfinder. Can be set when [SDI + HDMI OUTPUT] is set to [ON].
The items that can be set are as follows.
≥[AUTO], [LCD]
(Factory setting: [AUTO])
Signal is output from both the <SDI OUT> terminal and the <HDMI> terminal.
Signal set in [VIDEO OUT/LCD/VF] menu
Outputs from the <SDI OUT> terminal.
Outputs from the <HDMI> terminal.
Outputs in 1920×1080p.
Outputs in 1920×1080i.
Outputs in 1920×1080PsF.
Outputs in 1280×720p.
Format that can be output from the SDI OUT terminal [X2]:
Outputs in 3840×2160p (4:2:2/10 bit).
Outputs in 3840×2160p (4:2:0/8 bit).
Outputs in 1920×1080p.
Outputs in 1920×1080i.
Outputs in 1280×720p.
Outputs in 720×480p.
Outputs in 720×576p.
Format that can be output from the HDMI terminal:
[VIDEO OUT SEL] [EXTERNAL OUT SEL] is output.
97
239)
240)