Copying Your Tapes (Dubbing) - Panasonic Palmcoder PalmSight PV-L551 Operating Instructions Manual

Copying your Tapes (dubbing)

Connections
Source
(Playing)
Camcorder
Audio/Video
Cable
(supplied)
Audio/Video
Out
To Audio In
Recording VCR
Monitor with your TV
• Turn TV on and tune to VCR channel
(CH3 or CH4).
• Set TV/VCR Selector on VCR to VCR.
22
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com
Before you begin...
• Make Camcorder-VCR connections (see left).
• Turn both units on.
• Set VCR input signal to LINE.
• Set Camcorder POWER to VCR.
1
T V
2
3
VHF Connecting
Cable
(not supplied)
4
To Video In
5
Note:
• Camcorder will only playback tapes
• Dubbing may reduce picture quality.
Please see VCR owner's manual.
Insert a pre-recorded tape
into Camcorder and a blank tape with
record tab into VCR.
Press PLAY on Camcorder, then press
STILL at starting point.
Press REC, then STILL/PAUSE on
VCR.
Press STILL on Camcorder and STILL/
PAUSE on VCR to start copying.
Press STOP on both units to stop
copying.
recorded in SP or SLP mode.
CAUTION:
Unauthorized exchanging and/or copying
of copyrighted recordings may be
copyright infringement.