Wired Lan Settings - Panasonic HC-X2 Operating Instructions Manual

Network Connection – Network settings

Wired LAN settings

These are the settings when using a wired LAN.
For the
1
Select the [NETWORK] menu
2
In [NETWORK] menu
as required.
•
For details about the setting items (
[LAN]: 274)
3
Close the menu or return to the level of the [NETWORK] menu.
4
Configure the settings of the wired LAN on your device such as a computer.
For more information, refer to the operating instructions or help for the connection device.
Setting items for [LAN IPv4 SETTING], and [LAN IPv6 SETTING] when set to [LAN]
[LAN IPv4 SETTING]
[LAN IPv6 SETTING]
[DEVICE SEL]
[LAN IPv4 SETTING] and [LAN IPv6 SETTING], set each item
Setting items for [LAN IPv4 SETTING], and [LAN IPv6 SETTING] when set to
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[PRIMARY DNS]
[SECONDARY DNS]
[ENABLE/DISABLE]
[DHCP]
[IP ADDRESS]
[PREFIX LENGTH]
[DEFAULT GATEWAY]
[PRIMARY DNS]
[SECONDARY DNS]
[LAN].
Setting the DHCP function
•
[OFF]: Does not use DHCP.
•
[CLIENT]: Acquires automatically with DHCP.
•
[SERVER]: Enables the DHCP server function of the unit.
(Factory setting: [OFF])
IP address of the unit
(Factory setting: [192.168.0.1])
Subnet mask
(Factory setting: [255.255.255.0])
Default gateway
(Factory setting: [192.168.0.254])
Primary DNS server setting
(Factory setting: [0.0.0.0])
Secondary DNS server setting
(Factory setting: [0.0.0.0])
IPv6 setting
•
[ENABLE]: Uses IPv6.
•
[DISABLE]: Does not use IPv6.
(Factory setting: [DISABLE])
Setting the DHCP function
•
[OFF]: Does not use DHCP.
•
[CLIENT]: Acquires automatically with DHCP.
(Factory setting: [OFF])
IP address of the unit
(Factory setting: [::])
Prefix length settings of the subnet
(Factory setting: [64])
Default gateway
(Factory setting: [::])
Primary DNS server
(Factory setting: [::])
Secondary DNS server
(Factory setting: [::])
274