Table of Contents
Advertisement
Menu – [SCENE FILE] menu
[SYNC SCAN SETTING]
Displays the speed of the synchro scan shutter that is used when shooting video for television etc.
The items that can be set are as follows.
Frame rate of the recording format
59.94p/59.94i
29.97p
23.98p
50.00p/50.00i
25.00p
•
This can be set when all of the following conditions are fulfilled:
– When the <AUTO/MANU> switch is set to <MANU>
– When the manual shutter mode is set
– When the [SCENE FILE] menu
– Flash band compensation function is disabled
[MASTER DTL]
Sets the level of the detail effect of the whole part.
The items that can be set are as follows.
≥[−31]...[+31]
[DTL CORING]
Sets the level of signal (including noise) that does not activate the detail effect.
The items that can be set are as follows.
≥[0]...[61]
[V.DTL LEVEL]
Sets the intensity of the detail level in the vertical direction.
The items that can be set are as follows.
≥[−7]...[+7]
[SKIN TONE DTL.]
The skin of human subjects can be made to appear smoother when recorded.
The items that can be set are as follows.
≥[ON], [OFF]
•
If the background or anything else in the scene has colors similar to the skin color, they will also be smoothed.
•
If the brightness is insufficient, the effect may not be clear.
•
If you record a person in the distance, the face may not be recorded clearly. In this case, set [SKIN TONE DTL.] to [OFF] or
zoom in on the face (close-up) to record.
[SKIN DTL EFFECT]
Sets the effective level of the skin tone detail.
The items that can be set are as follows.
≥[0]...[31]
[1/60.0]...[1/249.6]
[1/30.0]...[1/249.8]
[1/24.0]...[1/249.7]
[1/50.0]...[1/250.0]
[1/25.0]...[1/250.0]
[SYNC SCAN]
[ON] is set
87
Setting value
Advertisement
Table of Contents
