2 - 4
DS6708 Digital Scanner Product Reference Guide
LED Definitions
In addition to beep sequences, the digital scanner uses a two-color LED to indicate status.
LED colors that display during scanning.
Standard LED Definitions
Table 2-2
LED
Off
Green
Red
Scanning in Hand-Held Mode
Install and program the digital scanner (see
contact the local supplier or the local
Scanning with the Digital Scanner
Ensure all connections are secure (see the appropriate host chapter.)
1.
Aim the digital scanner at the bar code.
2.
Scanning in Hand-Held Mode
Figure 2-9
When the digital scanner senses movement, in its default Auto Aim trigger mode, it projects a red laser
3.
aiming pattern (shown in
view. (To turn off the default Auto Aim trigger mode, see
Laser Aiming Pattern
Figure 2-10
If necessary, the digital scanner turns on its red LEDs to illuminate the target bar code.
No power is applied to the digital scanner, or the digital scanner is on and ready to
scan.
A bar code was successfully decoded.
A data transmission error or digital scanner malfunction occurred.
Setting Up the Digital Scanner on page
Symbol Global Interaction
Figure
2-10) which allows positioning the bar code or object within the field of
Indication
1-3). For assistance,
Center.
Trigger Mode on page
4-8.)
Table 2-2
defines