Installing The Resident Demo Application; Bypass Application Auto-Boot; Delete The Current Resident Demo Application Version; Install A New Resident Demo Application Version - Symbol MK2000 MicroKiosk Product Reference Manual

MK2000 MicroKiosk Product Reference Guide

Installing the Resident Demo Application

If MK2000 is set to automatically launch an application on power-up, then proceed to the
Bypass application auto-boot steps.
If there is an existing copy of the Demo Applications on the MK2000 perform the Delete the
current Demo Applications version steps and provide access to the Windows

Bypass Application Auto-Boot

1. To perform a cold boot press and hold buttons B and C until the display goes blank
(typically 15 seconds) then release buttons, see Figure 1-1 on page 1-3. The
MK2000 reboots.
2. To prevent the MK2000 from entering an application, simultaneously hold down
buttons A and D just after the blue Performing System Initialization (Phase 1)
screen appears. The A and D buttons must be held down before the message
changes to Phase 2.
3. When the Enter Password prompt appears, enter DDBAC and touch OK on the
screen, or simultaneously press the A and B buttons for Enter.
4. The MK2000 enters Protected Mode and the Win CE desktop appears.

Delete The Current Resident Demo Application Version

1. Double tap the My Computer icon on the CE desktop.
2. Double tap the Application folder.
3. Select and delete the Resident_MK2000_Demo_App folder
4. Select and delete the mkconfig.reg file.
Note: Use the delete functionality contained in the Files Menu to remove
the desired files.

Install A New Resident Demo Application Version

1. Download the Resident Demo Application: MK2000RDEMOAPP-x.xx (individually
or as part of the SDK) at: http://devzone.symbol.com.
2. To load Resident Demo Application onto a CF card, use a PC to copy the following
two items onto the CF card:
• A folder labeled Resident_MK2000_Demo_App
• A file labeled mkconfig.reg.
4-4
®
CE Desktop.