I5, Iseries, Or As/400 And Serial Server Interface Overview - Eaton Powerware 9125 Installation Manual

COMMUNICATION OPTIONS

i5, iSeries, or AS/400 and Serial Server Interface Overview

To connect the UPS to an i5, iSeries, or AS/400 and a serial server you
need:
S
S
S
Follow the instructions included with the Relay-Serial Card and Cable Kit
to install the card and set UPS monitoring functions in i5/OS and serial
(TTY) server. Installation may include removal of an existing X-Slot card
from the UPS.
Follow the software installation instructions contained on the Software
Suite CD to install the Powerware LanSafe software.
If you have an i5, connect the cables as shown in Figure 37. Otherwise,
see Figure 38 to connect the cables.
44
EATON Powerware
An Eaton-supplied Relay-Serial Card, an AS/400 interface cable
(labeled 152601976-001), and a serial interface cable (labeled
124102044-001), located in the FC 2939 carton labeled "Cable Kit for
IBM iSeries and Windows or AIX/Linux Servers"
For the i5 only: An IBM-supplied UPS interface cable (labeled 1827),
included with the server
For the serial server only: Powerware LanSafe
Software from the Software Suite CD, located in the E64 accessory
kit
®
9125 (9910-E64) UPS Installation Guide for IBM
®
Power Management
® S
Applications 164201697 Rev 1