Serial (Tty) Interface Overview - Eaton Powerware 9125 Installation Manual

Serial (TTY) Interface Overview

To serially (TTY) connect the UPS to a p5, pSeries, RS/6000
OpenPower or other system you need:
S
S
For p5 installations, you also need:
S
S
Follow the software installation instructions contained on the Software
Suite CD to install the Powerware LanSafe software. Connect the serial
cable as shown in Figure 39.
®
EATON Powerware
An Eaton-supplied serial interface cable (labeled 116750226-001 or
124102044-001), located in the E64 accessory kit
®
Powerware LanSafe Power Management Software from the
Software Suite CD, located in the E64 accessory kit
An IBM-supplied 2-port Asynchronous EIA adapter (FC 5723) installed
on a p5 server (the pSeries does not require an EIA adapter)
An IBM-supplied maintenance package 5200-05 for AIX
(APAR IY66260); or the maintenance package 5300-01 for AIX 5.3L
V5.3 (APAR IY62267)
IBM p5 Server
Serial Interface Cable
(labeled 116750226-001
or 124102044-001)
Communication Port
UPS
Figure 39. Serial (TTY) Interface
9125 (9910-E64) UPS Installation Guide for IBM
COMMUNICATION OPTIONS
, ®
®
5.2L V5.2
2-Port Asynchronous
EIA Adapter
(FC 5723)
® S
Applications 164201697 Rev 1
47