Web/Snmp Module (Optional); As/400 Relay Module (Optional) - Eaton Powerware 9155 UPS20-30kVA User Manual

The UPS supports two serial communication devices according to the table below.
Configuration
Default #1
Default #2
Default #3
Default #4
Table 3 Typical XSlot configurations for UPS communication.
Web/SNMP Module (optional)
The module supports HTTP and SNMP compliant remote monitoring and shutdown for
the protected computer systems. It can be connected to a twisted-pair Ethernet network
(10/100BaseT) using an RJ4 connector.
The Web/SNMP module has a build-in switching hub that allows three (3) additional network
devices to be connected to the network without the requirement of additional network drops.
In addition, an Environmental Monitoring Probe (EMP) can be requested from the UPS
manufacturer to obtain humidity, temperature and two relay inputs. It is connected to the
communication port of the Web/SNMP module as option.
Figure 13 ConnectUPS-X Web/SNMP Module and Environmental Monitoring Probe (EMP).
AS/400 Relay Module (optional)
The Relay Module provides potential free relay interface for AS/400 connected computers and
industrial applications. The relay interface supports both 1-pin D-sub connector and terminal
block connections up to four (4) potential free relays.
The relay contacts are rated for 1 A, 30 Vac or 200 mA, 60 Vdc, and they have a galvanic
isolation from the other circuits of the UPS unit.
1026743
Revision B
Independent
XSlot-1
Any XSlot Module
Any XSlot Module
Any XSlot Module
Any XSlot Module
UPS 20-30 kVA, 230 V 0/60 Hz output
User's Guide
Multiplexed
XSlot-2
Any XSlot Module
Relay Module
Not in use
Hot Sync card
Std. RS-232 port
Not in use
Available
Available
Available
27