Pdm Installation - Eaton Powerware 9125 Installation Manual

INSTALLATION

PDM Installation

Figure 18 on page 20 shows a typical installation only. See "PDM Rear
Panels" on page 20 for the rear panel of each model.
To install an optional FC 6571 PDM or FC 6572 PDM:
1.
2.
3.
Table 9. FC 6572 PDM Models Input/Output Voltage Settings
18
EATON Powerware
Verify that the PDM output circuit breaker is in the OFF position.
Verify that the bypass switch on the PDM is in the NORMAL
position (see Figure 17).
Bypass Switch
Figure 17. PDM (with Front Cover Removed)
FC 6571 PDM Models: Continue to Step 4 to determine the
input/output voltage settings.
FC 6572 PDM Models: Table 9 shows the input/output voltage
settings. Skip to Step 5 to continue the PDM installation.
Input Voltage (from UPS)
208
220
230
240
®
9125 (9910-E64) UPS Installation Guide for IBM
Voltage Switch
PDM Output Voltage
208
220
230
240
® S
Applications 164201697 Rev 1