Intermec Fingerprint - Intermec EasyCoder F2 Installation And Operation Manual

Intermec Finger-
print
Y
Intermec EasyCoder F2 – Installation & Operation Ed. 1
The label we will design in Intermec Fingerprint will contain a box,
an image, a bar code, and a line of text. Note that the illustrations
are not reproductions of the label, but are merely intended to show
the principles of label editing .
Printing a Box
Let us start by printing a box 430 dots high and 340 dots wide with
a 15 dot line thickness. The box is inserted at position X=10, Y=10:
NEW
10 PRPOS 10, 10
20 PRBOX 430,340,15
200 PRINTFEED
300 END
RUN
Note: The printer does not execute the program until you have typed
RUN .
X
Printing an Image
Now we add the image "GLOBE.1" after changing the print coor-
dinates to X=30,Y=30.
30 PRPOS 30,30
40 PRIMAGE "GLOBE.1"
RUN
Printing a Bar Code
To print a bar code, you need to choose a bar code type before you
print the bar code. Note there is no blank space in the bartype name.
50 PRPOS 75,270
60 BARTYPE "CODE39"
70 PRBAR "ABC"
RUN
Chapter 2 Print a Label
12