Industrial Interface Board (Option) - Intermec EasyCoder F2 Installation And Operation Manual

Industrial
Interface Board
Intermec EasyCoder F2 – Installation & Operation Ed. 1
The EasyCoder F2 can optionally be fitted with an Industrial Inter-
face Board, that provides the printer with one extra serial commu-
nication port ("uart2:), which can be configured for one of the fol-
lowing alternatives
RS 232C
RS 422 Non-isolated
RS 422 Isolated
RS 485 (not supported by Intermec Fingerprint 7.2)
This port is identical to "uart2:" on the double serial interface board.
The Industrial Interface Board also has a female DB-44 connector
with...
8 digital IN ports with optocouplers
8 digital OUT ports with optocouplers
4 OUT ports with relays.
Refer to the installation instructions for the Industrial Interface Board
or to the EasyCoder F2 Service Manual for further information.
Appendix 3 Communication Cables
Industrial Interface
"uart2:"
99