Printhead Replacement - Intermec EasyCoder F2 Installation And Operation Manual

Printhead
Replacement
1
Open the side door.
Intermec EasyCoder F2 – Installation & Operation Ed. 1
The printhead is subject to wear both from the thermal paper and
from the rapid heating and cooling processes during printing. Thus,
the printhead will require periodical replacement.
Time between printhead replacements depends on the print images,
the type of paper in use, the amount of energy to the printhead, and
several other factors.
Note!
While replacing the printhead, the power should be switched off.
2
Turn the printhead lift knob clockwise to lift the
Chapter 11 Maintenance
printhead
79