Tear-Off With Quick-Load - Intermec EasyCoder F2 Installation And Operation Manual

Tear-Off with
Quick-Load
1 a
Remove any empty paper core from the paper
supply spool, or....
Intermec EasyCoder F2 – Installation & Operation Ed. 1
In addition the paper load procedure for tear-off operation described
earlier in this chapter, the EasyCoder F2 can optionally be fitted
with a set of Quick-Load paper guides that makes paper load much
easier and quicker.
Quick-Load is usually not used in connection with a long side door
and cannot be combined with peel-off operation.
Use the <Feed> key (see figure #5) when loading the same type of
paper as before. When switching to a new type of media or when
the printer does not feed out the paper properly, simultaneously press
the <Shift> and <Feed> keys.
Important!
Full automatic loading without the operator having to press any
key requires a special set of Intermec Fingerprint instructions in
the application program.
1 b
...remove any empty paper core from the paper
Chapter 5
supply hanger.
Paper Load
33