Line Field - Intermec EasyCoder 501XP Programmer's Reference Manual

Chapter 4 — Label Design

4.7 Line Field

A line can be printed in right angles along or across the media path
according to the print direction.
In addition to the general formatting instructions
, a line fi eld is specifi ed by a single instruction.
DIR
Specify Size of the Line
The size of the line is specifi ed in regard of length and line weight (thick-
ness).
PRLINE | PL <length>,<line thickness>
<length>
<line thickness>
No default values.
Summary
To create a line fi eld, the following formatting instructions must be given
(in most cases default values may substitute missing parameters). Printing
instructions are explained in Chapter 5.2.
Purpose
X/Y Position
Alignment
Direction
Line size
Example:
PP 100,100:AN 1:DIR 4:PL 200,10 ↵
40 Intermec Direct Protocol v7.80 Programmer's Reference Manual
is the line length in dots along the selected direction.
is the line weight in dots.
Instruction
PP (PRPOS)
AN (ALIGN)
DIR
PL (PRLINE)
PRPOS
Default
0/0
1
1
n.a.
, , and
ALIGN
Remarks
Number of dots
Select ALIGN 1-9
Select DIR 1-4
Length and thick-
ness (dots)