Chapter 12 — Reference Lists
Instruction
FORMFEED (FF)
FRE
FUNCTEST$
HEAD
IMAGE LOAD
IMAGES
IMMEDIATE
INPUT ON/OFF
INVIMAGE (II)
KILL
LAYOUT END
LAYOUT INPUT
LAYOUT RUN
LBLCOND
LTS& ON/OFF
MAG
126
Intermec Direct Protocol v7.80 Programmer's Reference Manual
Chapter
Purpose
5.1
Activating the paper feed mechanism in order
to feed out or pull back a certain length of the
paper web.
8.1
Returning the number of free bytes in a part
of the printer's memory.
7.4, 7.5
Performing various hardware tests.
7.5
Returning the result of a thermal printhead
check.
8.5
Reception and conversion of image files in
.PCX format to images in a special bitmap
format.
8.1
Returning the names of all images stored in
the printer's memory to the standard OUT
channel.
7.8
Reading the status of various modes or
STDIO channels.
6.1
Enabling/disabling the Intermec Direct
Protocol.
4.3, 4.5
Inversing the printing of text and images
from "black-on-white" to "white-on-black."
8.2
Deleting a file from the printer's memory
or from a DOS-formatted memory card
inserted in an optional memory card adapter.
4.8
Stopping the recording of a layout description
and saving the layout.
4.8
Starting the recording of a layout description.
4.9
Providing variable input data to a predefined
layout.
6.24
Overriding media feed setup, switching off
LSS, or select mode.
6.7
Enabling or disabling the label taken sensor.
4.3, 4.5
Magnifying a font, barfont, or image up to
four times separately in regard of height and
width.